INFRARED REMOTE CONTROL SYSTEM
for the FRG-8800 Shortwave Receiver
 BRAND NEW - 1 YEAR WARRANTY
 

ONLY WE INCLUDE:
Remote Control with Jumbo buttons for no extra cost
 

While the FRG-8800 is an older model, the IR Remote still offers a lot of control of the receiver. With the IR Remote you can enter frequencies directly, move quickly up and down through frequencies, and control modes of the receiver. All of the features available through the CAT interface that apply to IR remote operation of the FRG-8800 have been implemented in the IR Remote. Yaesu does not provide a means to control the Volume or Squelch using the CAT interface.

The IR Remote connects directly to the FRG-8800 CAT port. The CAT cable is included. No additional equipment is required for IR remote operation.

With the addition of the RS232C Level Converter option, you can also control the FRG-8800 with your computer as well as have IR Remote control of the receiver. The FIF-232C CAT interface is not needed.

We have a Windows frequency logging and radio control program. This program has been tested with Windows 95, 98, 98SE, Me, and XP. You can scan frequency ranges, scan and select stored frequencies, and log your favorite frequencies by station. This program gives you virtually unlimited memories because the PC is used for memory storage.

REMOTE CONTROL FUNCTIONS for the FRG8800 Shortwave Receiver:

 Turn receiver on and off.

 Enter frequency directly to 10Hz in the range of 200kHz to 30MHz.

 Enter frequency directly in the range of 118MHz to 174MHz with optional VHF Converter (FRV-8800) installed.

 Increase or decrease frequency using CH +/- in steps of 10Hz, 100Hz, 1kHz, 5kHz, 9kHz, 10kHz, 100kHz, and 1MHz in the range of 200kHz to 30MHz; also from 118MHz to 174MHz with VHF Converter installed.

 Set up to five (5) User Tuning Steps. Useful for detuning frequencies by one half of filter bandwidth or use a very small frequency step to quickly zero-beat in SSB mode.

 Recall last directly entered frequency.

 Select mode - AM, FM, LSB, USB, and CW.

 Select filter - Wide or Narrow in AM and CW mode.

 Connect to a computer RS-232C port with optional SWL IR Remote Level Converter.

 Settable parameters:

o Enable/Disable VHF Converter operation.

o Frequency pacing. You can control the pacing of frequency up and down. This is how fast the frequency changes when you hold the CH+/- keys.

o Define up to five User Tuning Steps.

 Status LED that shows communications status, settable parameter entry, and clear key operation.

COMPLETE SYSTEM INCLUDES:

1. Infrared Remote Control Interface

2. AC Adapter for the Remote Control Interface

3. RS232 Interface Cable

4. Infrared Remote Controller with Large Buttons

My personal FRG-8800 receiver in the photos is NOT included.  

================

 GOOGLE  CHECKOUT

================

================

 PAYPAL  PURCHASE

================