HISONIC HS6541 PORTABLE PA SYSTEM

INCLUDED IN THE PACKAGE:

- HISONIC HS6541 150 WATT PA AMPLIFIER / SPEAKER

- TELESCOPIC HEAVY DUTY SPEAKER TRIPOD / STAND

- EXTENDED HEAVY DUTY POWER CABLE

- EXTENDED 1/4" AUDIO CABLE

- HISONIC HS596B VHF DUAL WIRELESS MICROPHONE SYSTEM:

2 Wireless Beltpack Transmitters with Lapel Microphones

2 Wireless Handheld Microphones

2 CHANNEL VHF RECEIVER with Volume Controls

- TRIPOD / STAND

- BONUS : 2 Headset Microphones

This powerful 150 watt HISONIC HS6541 Amplified PA Speaker combination is your complete sound solution for audiences of up to 750 to 1000 listeners. 300 TOTAL watts of crystal clear audio ensures that your voices are heard. The sound can easily be heard up to 200+ feet straight ahead.

Ideal for presentations in auditoriums, churches, theaters, studios, boardrooms, bingo and schools. The HS6541 is very sturdy and the dual system is simple to set up.

HS6541 amplified speaker includes a 10" woofer and a compression horn tweeter and can be mounted on a tripod for better audio dispersion. An extended audio cable is included to connect the two HS6541 amplified speakers to each other. Power supply extension cables are included to connect the speakers to the AC power source when they are situated on the tripods. An extended audio cable is included to connect the wireless microphone receiver to either one of the amplified HS6541 speakers.

HISONIC HS6541 Amplified PA Speaker Features:

150 Watts Peak / 120 Watts RMS Power
Microphone Volume, Line In Volume
Bass and Treble Controls
1/4" / XLR Mic Input
RCA jack L/R / XLR input
1/4" / XLR Line Out which is used to connect to a second HS6541 unit or for recording the output.
We supply a 100 foot XLR to XLR cable to connect the two HS6541 systems to each other.
Each HS6541 is compact, weighs approximately 32 pounds
and its dimensions are approximately 23" x 14.5" x 12".
The speakers have a built in wheels and a pull up handle that makes it
easy to take them from place to place.

HS596B DUAL WIRELESS MICROPHONES SYSTEM

The HS596B wireless system comes with 2 beltpack transmitters, 2 lapel microphones, 2 handheld microphones 2 headset microphones and a deluxe 2 channel receiver with an AC power adapter. This is an excellent quality system that operates in the high VHF frequency spectrum away from the typical FM frequency area that lesser units use and without interference from radio stations.

This system is designed to allow one or two persons to simultaneously use the microphones and the 2 channel receiver as the receiver has individual volume controls for each channel on the front panel. Built in LEDs identify the signal present, audio level and power on conditions.

The beltpack transmitters are each powered by a nine-volt battery (2 included). There is an easy to adjust microphone sensitivity (volume) control on the belt pack transmitter as well as an on/off switch.

The 2 channel receiver plugs into any PA system, MIXER, KARAOKE system with a 1/4" MIC input jack with the included cable. The potential distance of the transmission from the wireless microphones to the wireless receiver is around 150+ feet.

One or two wireless microphone combinations can be used at one time. Two combinations at a time maximum. Either two of the included handheld microphones (which are great for singing or speaking) or two of the lapel or head microphones with the beltpack transmitters or one handheld microphone and one lapel / head microphone can be used at the same time.

The lapel and head microphones are the deluxe type that screw into the belt pack transmitters so they can't be pulled out accidentally. Lesser systems just plug into the MIC jack and can easily be accidentally disconnected.

SPECIFICATIONS FOR THE HS596B WIRELESS MICROPHONE SYSTEM:

Carrier Frequency: VHF High
Frequency Steadying: Less Than 0.005%
Modulation Mode: FM Audio
Dynamic Range: Over 80 dB
Audio Frequency Response: 40Hz - 18KHz +- 3dB
Audio Output level: 0- 300mV
Volume control on each channel (2 control knobs)
S/N ratio: Over 70 dB T.H.D. Less than 0.5%
Sensitivity: 3uV for 30dB
S/N F/N ratio: over 80 dB
P/N ratio: over 80 dB
Output power: 10mW
Receiver Power Source: AC adapter / 110V 60Hz
Range: 150 Feet
Beltpack Transmitter Power Source: 9V battery
Handheld Microphone Power Source: 9V battery

TELESCOPIC TRIPOD / STAND

for the HISONIC HS6541 150 WATT PA AMPLIFIER / SPEAKER

POWER AND AUDIO 10 FOOT EXTENDED CABLES INCLUDED

The telescopic tripod / stand is for the 150 watt HISONIC HS6541 Amplified PA Speaker. The amplified speaker has a recessed connector on it's bottom designed for this tripod to be inserted into. Extended cables are included to allow the connection of AC power and the 1/4" plug cable into the wireless microphone receiver. By using this stand / tripod the HS6541 can be elevated to the audiences ear level for better sound distribution and distance.

PA SYSTEM INFORMATION

$399.95 + $79.95 S/H/I in the continental USA

HISONIC HS6541 150 WATT PA SYSTEM
with HS596B WIRELESS MICROPHONE SYSTEM + TRIPOD/STAND
It may be used to amplify just your voice and or plug in an audio source for a true multi-media presentation. The dual VHF wireless lapel + headset wireless microphones or the handheld wireless microphones and you're all set for an excellent presentation.

HISONIC HS6541 150 WATT PA SYSTEM
with HS596B WIRELESS MICROPHONE SYSTEM + TRIPOD/STAND
+ 2 x BONUS HEADSET MICROPHONES