DUAL HISONIC HS683 PORTABLE PA SYSTEM

INCLUDED IN THE PACKAGE:

- 2 x HISONIC HS683 120 WATT PA AMPLIFIER / SPEAKER

- TELESCOPIC HEAVY DUTY SPEAKER TRIPOD / STAND

- EXTENDED HEAVY DUTY POWER CABLE

- EXTENDED 1/4" AUDIO CABLE

- 100 FEET XLR SPEAKER TO SPEAKER CABLE

- HISONIC HS596B VHF DUAL WIRELESS MICROPHONE SYSTEM:

2 Wireless Beltpack Transmitters with Lapel Microphones

2 Wireless Handheld Microphones

2 CHANNEL VHF RECEIVER with Volume Controls

- TRIPOD / STAND

- BONUS : 2 Headset Microphones

The powerful 120 watt HISONIC HS683 Amplified PA Speaker combined with included HISONIC HS596B VHF wireless microphone system is your complete sound solution for audiences of up to 750 or more. 120 Watts of crystal clear audio ensures that your voices are heard.

The sound can easily be heard up to 150+ feet straight ahead. Ideal for multimedia presentations in auditoriums, churches, theaters, studios, boardrooms and schools, the HS683 is sturdy and simple to set up.

The HS683 may be used to amplify just your voice and or plug in an audio source for a true multi-media presentation. Use the included dual VHF wireless lapel + headset wireless microphones or the handheld wireless microphones and you're all set for an excellent presentation.

HISONIC HS683 PORTABLE PA SYSTEM FEATURES:

120 Watts Peak / 100 Watts RMS Power,
Microphone Volume, Line In Volume,
Bass and Treble Controls,
1/4" / XLR Mic Input,
RCA jack L/R / XLR input and a 1/4" / XLR Line Out which can be used
to connect to a second HS683 unit or for recording the output
We supply a 50 foot XLR to XLR cable to connect the two HS683 systems to each other.
The HS683 is compact, weighs approximately 32 pounds
Dimensions are approximately 24" x 14" x 12".
Speaker brackets are also provided to position the unit on it's side

HS596B DUAL WIRELESS MICROPHONES SYSTEM

The HS596B wireless system comes with 2 beltpack transmitters, 2 lapel microphones, 2 handheld microphones 2 headset microphones and a deluxe 2 channel receiver with an AC power adapter. This is an excellent quality system that operates in the high VHF frequency spectrum away from the typical FM frequency area that lesser units use and without interference from radio stations.

This system is designed to allow one or two persons to simultaneously use the microphones and the 2 channel receiver as the receiver has individual volume controls for each channel on the front panel. Built in LEDs identify the signal present, audio level and power on conditions.

The beltpack transmitters are each powered by a nine-volt battery (2 included). There is an easy to adjust microphone sensitivity (volume) control on the belt pack transmitter as well as an on/off switch. The 2 channel receiver plugs into any PA system, MIXER, KARAOKE system with a 1/4" MIC input jack with the included cable. The potential distance of the transmission from the wireless microphones to the wireless receiver is around 150+ feet.

One or two wireless microphone combinations can be used at one time. Two combinations at a time maximum. Either two of the included bonus handheld microphones (which are great for singing or speaking) or two of the lapel microphones with the beltpack transmitter or one handheld microphone and one lapel microphone can be used at the same time.

The lapel microphones are the deluxe type that screw into the belt pack transmitters so they can't be pulled out accidentally. Lesser systems just plug into the MIC jack and can easily be accidentally disconnected.

SPECIFICATIONS FOR THE HS596B WIRELESS MICROPHONE SYSTEM:

Carrier Frequency: VHF High
Frequency Steadying: Less Than 0.005%
Modulation Mode: FM Audio
Dynamic Range: Over 80 dB
Audio Frequency Response: 40Hz - 18KHz +- 3dB
Audio Output level: 0- 300mV
Volume control on each channel (2 control knobs)
S/N ratio: Over 70 dB T.H.D. Less than 0.5%
Sensitivity: 3uV for 30dB
S/N F/N ratio: over 80 dB
P/N ratio: over 80 dB
Output power: 10mW
Receiver Power Source: AC adapter / 110V 60Hz
Range: 150 Feet
Beltpack Transmitter Power Source: 9V battery
Handheld Microphone Power Source: 9V battery

TELESCOPIC TRIPOD / STAND

for the HISONIC HS683 120 WATT PA AMPLIFIER / SPEAKER

POWER AND AUDIO 10 FOOT EXTENDED CABLES INCLUDED

The telescopic tripod / stand is for the 120 watt HISONIC HS683 Amplified PA Speaker. The amplified speaker has a recessed connector on it's bottom designed for this tripod to be inserted into. Extended cables are included to allow the connection of AC power and the 1/4" plug cable into the wireless microphone receiver. By using this stand / tripod the HS683 can be elevated to the audiences ear level for better sound distribution and distance.

PA SYSTEM INFORMATION

DUAL HISONIC HS683 120 WATT PA SYSTEM
with HS596B WIRELESS MICROPHONE SYSTEM + 2 x TRIPOD/STAND
+ 2 x BONUS HEADSET MICROPHONES

$599.95 + $99.95 S/H/I in the continental USA

DUAL HISONIC HS683 120 WATT PA SYSTEM
with HS596B WIRELESS MICROPHONE SYSTEM + 2 x TRIPOD/STAND
It may be used to amplify just your voice and or plug in an audio source for a true multi-media presentation. With the dual VHF wireless lapel + headset wireless microphones or the handheld wireless microphones and you're all set for an excellent presentation.

Credit Card Merchant

COMPARE
PUBLIC ADDRESS SYSTEMS

TRIPODPA / SPEAKER

HS6541 PA HS596B

TRIPOD
PA / SPEAKER