
|
Wireless Microphone System AWM6032UM -
A delicately designed silence circuit eliminates static noise when the transmitters are either turned off or out of transmission range.
An auto mute circuit is incorporated in these systems to effectively eliminate the popping noise when the switch is turned on or off.
The AWM6032U system has been designed and manufactured to be problem free, versatile and easy to use.
The Wireless Microphone System AWM6032U -
APPLICATIONS for the Wireless Microphone System AWM6032U - Musician; disc jockey (DJ); karaoke jockey (KJ); church; school; conference room; karaoke; home entertainment
Wireless Microphone System AWM6032U RECEIVER FEATURES: UHF Band Frequency (800MHz) Two Independent XLR Balanced Outputs One 1/4" Unbalanced Audio Output RF Input with Built- Sensitivity and Dynamic Range Low Noise Mixer Circuitry for Reducing interference Two Squelch Control Knobs (One for Each Channel) at the Rear Panel 12V-
Wireless Microphone System AWM6032U RECEIVER SPECIFICATIONS: Carrier Frequency Range : UHF Band Frequency Stability : ± 0.005% Receiving Sensitivity: - S/N Ratio: 80dB T.H.D. < 1% Audio Output : ¼” and XLR (0 – 300mV @ 600 Ohms) Dimensions (W X H X D): 8.5” X 1.6” X 5.4” (215 X 40 X 138 mm)
Wireless Microphone System AWM6032U TRANSMITTERS FEATURES: UHF Band Frequency (800MHz) High Sensitivity Cardioids Microphone Capsule Audio Level Adjustment Knob for the AWX6030M, AWX6030H, and AWX6030G Noise Reduction Mechanism for Eliminating Handling Noise and Switch Shock Noise Low Battery LED Indicator
Wireless Microphone System AWM6032U TRANSMITTERS SPECIFICATIONS: Carrier Frequency Range: UHF Band (800MHz) Frequency Stability ± 0.005% Modulation: Frequency Modulation (FM) Modulation Depth 40KHz Output Power 30mW, Max Spurious Emission > 55 dB Battery: 9V Battery Current Consumption < 40 mA Dimensions (W X H X D): Handheld: 9.3” X 2.0” X 2.0” (235 X 50 X 50 mm) Belt-
SYSTEM OPERATION LAPEL (LAVALIERE) MICROPHONE SYSTEM Set the antennas at an angle 45 from the floor and 90 away from each other to achieve the best RF reception. Connect the AWR6032U receiver DC input to an AC power source via the supplied AC/DC adaptor. Connect the AWR6032U receiver audio output to the microphone input of a mixer via the supplied audio cable or any other appropriate cable. (Note: There are two outputs: one unbalanced output and one balanced output.) Place one 9V battery into the battery housing of the AWX6030M transmitter with the battery polarity oriented as indicated. Connect the supplied lapel (lavaliere) microphone to the AWX6030M transmitter. Turn on the power of the AWR6032U receiver. The Power On LED light will be turned on. On the AWX6030M, the On/Off switch has three positions: “ON”, “STDBY” and “OFF”.
When the On/Off switch is turned to the “STDBY” or directly to the “ON” position,
the low battery LED indicator will blink once and then stay off. If the low battery
LED indicator stays on, the 9V battery needs to be replaced. When the On/Off switch
is set to the “STDBY” or “ON” position, the corresponding channel 1 RF LED light
or channel 2 RF LED light on the AWR6032U receiver will be turned on. The corresponding
channel 1 AF LED light or channel 2 AF LED light will be on whenever the AWX6030M
transmitter receives any sound while the On/Off switch is set at the “ON” position.
The audio level adjustment knob is preset at midpoint. If you need to increase the
audio level, use a screwdriver to turn the audio level adjustment knob clockwise.
Turn the audio level adjustment knob counter- Adjust the volume control knob on the AWR6032U receiver to have an optimal sound quality.
OPERATION NOTES The AWX6030, AWX6030M, AWX6030H, or AWX6030G needs to be turned off before changing the 9V battery. Signal dropout or unexpected noise may be caused by a low battery or by an excessive distance between the transmitter and the receiver. If you encounter signal dropout or unexpected noise, please check the battery first. If battery is still fresh, try to readjust the antennas on the AWR6032U receiver. Avoid placing the receiver in a corner to prevent any RF reception deterioration. Avoid placing the receiver antennas close to an obstruction or close to any metal surface. Try to place the receiver as far away from any digital equipment, including computers and some CD players, as possible. If more than one AWM6032U wireless microphone systems are stacked together or placed in a rack, do not let the antennas touch each other or cross each other. Before the AWM6032U is to be used in a new location, place the AWR6032U receiver
at the intended location and walk- Do not drop the transmitter on the floor or strike the transmitter with any object. Always turn off the transmitter and remove the battery if the transmitter is not to be used for a period of time to prevent the transmitter from being damaged by a leaking battery.
|

Feel free to ask us for purchasing advice
FOR INFORMATION CALL
954-
or send
us an e-
and we'll respond promptly to your
request.
TO PLACE AN ORDER OVER THE PHONE
with your
Monday -
(800) 897-
|
$119.95 + $19.95 S/H/I in the continental US |

AWM6032U
|
AWM6032UMLapel |
AWM6032UH
|
AWM6547DU
|
AWM6547DUM
|
AWM6547DUG
|
AWM6547DUH
|
NADY UHF-
Handheld |
NADY UHF-
Headset |
NADY UHF-
Lapel |
NADY UHF-
Guitar |
NADY UHF-
Handheld |
NADY UHF-
Headset |
NADY UHF-
Lapel |
NADY UHF-
Guitar |
NADY 401X
|
NADY 401X
|
NADY 401X
|
NADY 401X
|
NADY U-
2 HH + 2 HS |
NADY U-
2 HH + 2 LP |
NADY U-
4 Headset |
NADY U-
4 Handheld |
NADY U-
4 Lapel |
NADY U-
8 Lapel |
NADY U-
8 Headset |
NADY U-
8 Handheld |
HISONIC
|